English
Arabic
Chinese (Simplified)
Czech
Danish
Dutch
French
German
Italian
Norwegian
Polish
Portuguese
Romanian
Russian
Spanish
Turkish
I-PAINTCLAY AND TADELAKT TECHNIQUES
Clay Construction Techniques Overview of different applications with Tierrafino clay products
Clay Construction Techniques
This document provides an overview of the various clay construction techniques that are possible with Tierrafino Clay Products.
Such as: Base, Duro, Finish, Paints, Tadelakt and how to use them on different materials substrates and as a surface.
Shown: A side view of the Tierrafino demonstration panel
Description of materials used:
Fermacell RK glued, 100 mm wide fiberglass reinforced tape. Tierracol contact 3 mm roughened with a metal comb. 5mm Base S2 without straw, smoothed with Listro Iquitos green.
Finishing with other Leembouw products is possible.
Description of materials used:
Clay plate 22 mm, jute 150 mm reinforced, TierraCol contact 3 mm roughened with a metal comb, 5 mm Base S2 without straw smooth plastered and with DryPaint in four thin layers to high gloss polish.
Finishing with other Leembouw products is possible.
Description of materials used:
Wood fiber insulation board 20 mm, WEM heating system, 20 mm Base with straw S1, roughened with metal comb, 10 mm Base S1 with straw and fiberglass reinforcement on top. Maximum 5 mm Base S1 with straw, smooth plastered. I-Paint Nassau Orange.
Finishing with other Leembouw products is possible.
Description of materials used:
Plasterboard with the joints and holes filled. Tierrafino contact primer, 3 mm Tierrafino Finish Delphi white. For other finishes such as Duro, T-Paint, DryPaint and I-Paint, smooth the surface completely with Gypsum or TierraCol 3 – 5 mm.
Finishing with other Leembouw products is possible.
Description of materials used:
20 mm Wedi-Board, primer Ardex P51, 4 mm Ardex A950, glass fiber reinforced, 3 mm Ardex A950, roughened with a textured roller, 4 – 5 mm Tierrafino Stone (Tadelakt) 5% Gomera gray and 95% Delphi white, diamond shaped sgraffito.
Finishing with other clay and lime products is possible.
Description of materials used:
Reed, 10 mm Base S2 without straw, 10 mm Base S2 without straw, 3 mm Tierrafino Finish Dover-white rough finish.
Other Finishes such as Duro, T-Paint, I-Paint and DryPaint also possible.
Description of materials used:
Stone mesh, 10 mm Base S2 without straw, 10 mm Base S2 without straw. Left side: Maximum 3.5 mm Tierrafino Finish Gomera gray with 10% mother-of-pearl, scouring pad and brushed. Right side: 5 mm Tierrafino Base White, treated with a rough scouring pad.
Other finishes also possible.
Description of materials used:
Wood fiber insulation board 40 mm, 3 mm TierraCol, 100 mm wide fiberglass reinforcement, 10 mm Base S2 with straw, DryPaint in two layers, painted.
Other finishes also possible.
Description of materials used:
Brick. Left side: 8 mm Base S1 with straw and 2 mm Duro Dover-white, stainless steel plaster profile. Right side: primer Ardex P51, 4 mm Ardex A950, glass fiber reinforcement, 3 mm Ardex A950, textured roller roughened, Tierrafino Stone (Tadelakt) 4 – 5 mm Gomera gray with Haas sgrafitto.
Description of materials used:
Ytong blocks. Right side: 6 mm TierraCol and T-Paint Gomera, stainless steel plaster profile. Left side: primer Ardex P51, 3 mm Ardex A950, glass fiber reinforcement, 2 mm Ardex A950, structure roller roughened and Tierrafino Stone (Tadelakt) Dover-white 4- 5 mm.