Eco Building material plaster paint earth adobe mud clay: Application of Tierrafino T-paint can be considered as painting a rough textured wall paint with a brush or a roller.
Tierrafino T-paint can not be used to fill holes.
On equal substrates Tierrafino T-paint's covering capacity is excellent. Click here for an overview of substrates and other technical information in the Tierrafino T-paint Technical Data Sheet .
Mixing buckets, mixer, brushes, soft roller, fine mazed sponge, masking tape, soft brush (horse hair).
Substrates must be dry, solid and free of grease and dust. If necessary clean substrate with a grease dissolving cleanser. A coarse substtrate can be used for Tierrafino T-paint.
Very smooth susbtrates must be sanded down with sand paper, or roughened with a steel brush. In some cases using Tierrafino Fix will give some grip on extremely smooth surfaces that are very hard to roughen.
Add 12,5 Kg Tierrafino T-paint to 6,5 liters of water while continually stirring. Stir until a smooth paste is achieved.
Add a little water if so desired.
Apply Tierrafino T-paint onto the wall with a brush. Spread the material to desire with the brush.
When after some drying, but when T-paint is still moist, the substrate is visable, retouch these spots with a soft haired brush. This way the fine earth will cover these spots but the texture as a whole is not altered.
Apply Tierrafino T-paint with a soft haired roller to the wall or ceiling. By repeating rolling over the surface without adding new material, the material is spread out well and the finish will have a more equal texture, less wild.
Let Tierrafino T-paint dry. The covering capacity can only be seen after drying.
Apply some new material onto spots where the substrate is visable and create a similar texture to the surroundings. A small difference may occur in color between the first applied material and the dried retouched spots. This difference will not be visable after finishing Tierrafino T-paint mud wall.
Tierrafino T-paint can best be finished when it has fully dried out. Preferably a day after application. It is possible to finish T-paint as soon as it has its dry colour, but it must then be done quite gently.
Carefully wipe the surface of T-paint down with a moist, not wet, sponge. This takes fine earth away from the surface of sands, the color of sands should now be visable. Using a fine mazed sponge is preferred over a rough grated one. When after wiping T-paint down once the sands are not clearly visable, repeat this once or twice. Some sand may come loose from the surface while wiping. It is important not to change the texture by pressing too hard.
Finally Tierrafino T-paint is brushed with a soft brush to make the sparkle of sands visable. A horse hair brush, or a wide soft painting brush are good tools to use for this.
Tierrafino T-paint, depending on substrate and circumstances, is dry after 1 to 12 hours.
Tierrafino T-paint has hardened out after 2 weeks.
Tierrafino T-paint is porous and can therefor absorb dust. It is possible to clean T-paint with a moist sponge. When a stain is permanent, remove stained Tpaint and repair by applying as described above. After repairing wipe the whole wall down with a moist sponge and brush once.
Apply at a temperature above 5ºC.
Once mixed with water, apply within 1 week.
Approx. 0,7 kg/m² per coat.
One bucket of 12,5 kg Tierrafino T-paint will cover approx. 18 m², when the substrate is equal in colour.
One bucket of 6 kg Tierrafino T-paint will cover approx. 8,5 m², when the substrate is equal in colour.
Clay, sand, starch. Due to the natural character of earth pigments used, slight variations of color may occur between different batches of the same colour.
No hazards safety instructions are appplicable. Intended for painting. Avoid contact with eyes and skin.
Keep closed, dry and cool.
Although this product-description has been put together with utmost precision, Tierrafino will not be liable for any indirect or direct damage that may occur, by using the information offered in this product description.